Network Troubleshooting & Assurance (ENCOR / CCNP Quiz) Please enter your email: In TOP-DOWN Troubleshooting APPROACH, from which layer you should start troubleshooting? Application Layer Data Link Layer Network Layer Physical Layer Which Wireshark filter is used to filter traffic based on Source IP Address? ip.addr == 10.0.0.1 ip.src == 10.0.0.1 ip.dst == 10.0.0.1 !(ip.addr == 10.0.0.1) Which Network troubleshooting tool/utility can be used to measure latency/delay between source and destination hosts? RSPAN SNMP SPAN PING Which Wireshark filter is used to filter Packets that have 10.0.0.1 either as source or destination IP? ip.src == 10.0.0.1 ip.addr == 10.0.0.1 ip.dst == 10.0.0.1 !(ip.addr == 10.0.0.1) ICMP Protocol belongs to which layer of OSI Model? Layer 2 Layer 1 Layer 4 Layer 3 Which Wireshark filter is used to filter all Broadcast Traffic? tcp.dstport == 80 eth.addr == 00:70:f4:23:18:c4 tcp.port == 80 eth.dst == ff:ff:ff:ff:ff:ff Which two network utilities/tools are used for Wireshark traffic monitoring if the monitoring terminal is not in the path of traffic? SPAN (for Switches) TRACEROUTE (for Routers) PING (for Switches) ICMP (for Routers) SPAN (for Switches) RITE (for Routers) TRACEROUTE (for Switches) RITE (for Routers) What are the two types of Wireshark Filters? FORWARDING FILTERS DISPLAY FILTERS CAPTURE FILTERS FORWARDING FILTERS CAPTURE FILTERS DISPLAY FILTERS CAPTURE FILTERS OUTPUT FILTERS PING is based on which protocol? Traceroute IGMP ICMP Tracepath Which Wireshark filter is used to filter Packets going to Internet via a secure method? udp.port == 0 tcp.port == 444 tcp.port == 80 tcp.port == 443 Loading … Written by
